(navigation image)
Home American Libraries | Canadian Libraries | Universal Library | Community Texts | Project Gutenberg | Biodiversity Heritage Library | Children's Library | Additional Collections
Search: Advanced Search
Anonymous User (login or join us)
Upload
See other formats

Full text of "Circuits"

Glowing Paper Pumpkins 



MakejProjects 



Glowing Paper Pumpkins 

Written By: BareConductive 

SUMMARY 

Materials 

Bare Paint 

Pen 

Paint Brush 

Paper as thin as you can get but copy paper works great 

Scissors 

Cellotape 

Components 

3V Button Cell Batteries UK: Farnell / US: RadioShack 

LED's UK: Farnell / US: RadioShack 

To find out more about Bare Paint visit http://www.bareconductive.com 



) Make Projects www.makeprojects.com Page 1 of 9 



Glowing Paper Pumpkins 



Step 1 — Glowing Paper Pumpkins 





" 




&/% 


01 



• Below is the list of Materials and Components you will need. 

• Bare Paint, Pen, Paint Brush, Tracing Paper, Scissors, Cellotape, 3V Button Cell Battery, 



Amber or Red LEDs 

Make sure you buy several batteries and LEDs for all your projects in advance to 

save on shipping charges, and so you don't have to wait to do fun tutorials. 



& 



) Make Projects 



www.makeprojects.com 



Page 2 of 9 



Glowing Paper Pumpkins 



Step 2 




• Make the pumpkin base. 

• The pumpkin base is the well-known origami ball, or water balloon. 

• Image No.1 - First of all you need to fold your piece of paper diagonally and cut off excess 
to make a square. 

• Image No.2 - Once you have a square fold it in half diagonally then horizonally, reopening 
each time. Repeat for opposite corners. 

• Image No.3 - Take your folded square, fold in half horizontally, then fold the corners inside 
to make a triangle. 

Step 3 





■^ik. I 








• Image No.4 - Next take the top layer of the triangle and fold the point up to the top and 
middle. Repeat on all sides to make a smaller square. 

• Image No.5 - Take the side points of the square and fold into the middle. Repeat on back 
side. 

• Image No.6 - Now that you have created little flaps, fold down the top points and insert 
them into the flaps. Repeat on back side. 



) Make Projects 



www.makeprojects.com 



Page 3 of 9 



Glowing Paper Pumpkins 
Step 4 




• Drawing battery and LED contacts, 
and your pumpkin design. 

• Unfold the square. 



Step 5 




• Take your button-cell battery and 
place it in the bottom right corner, 
in the triangle shown in the picture. 



) Make Projects 



www.makeprojects.com 



Page 4 of 9 



Glowing Paper Pumpkins 
Step 6 




Draw around your battery, on both this triangle and the adjacent triangle. 



Step 7 




• Draw on the contacts for the LED, 
leading away from the battery. 



) Make Projects 



www.makeprojects.com 



Page 5 of 9 



Glowing Paper Pumpkins 
Step 8 




• On the opposite side of the square draw your pumpkin face! :-) 

• You should now be ready to paint in your drawing with Bare Paint. 

Step 9 









^1 wL® IB 

1 M 



Use Bare Paint to fill in your drawing. 



) Make Projects 



www.makeprojects.com 



Page 6 of 9 



Glowing Paper Pumpkins 
Step 10 




• Attaching the LED 

• Image No.1 - Once the paint is dry, you can now stick your LED in place. Place the legs of 
the LED onto the two strips of paint. 

• Image No.2 - Tape in place with cellotape, making sure you have good contact between 
the paint and the LED. Place the battery onto one of the circles of paint. 



Step 11 




• Re-folding your pumpkin 

• Image No.1 - With the battery placed on the square of paint, carefully pinch the corner of 
the paper to make contact. If the battery is the right way around you should see your LED 
light; if not, flip the battery and check that your LED has good contact with the paint. 

• Image No.2 - Make sure you keep the battery pinched between the corner of the paper at 
all times so that the LED stays on as you refold your pumpkin. 

• Image No.3 - Still pinching the battery in place fold over the top left corner of the paper. 

) Make Projects www.makeprojects.com Page 7 of 9 



Glowing Paper Pumpkins 



Step 12 




• Image No.1 - The battery is now below my left finger. 

• Image No.2 - Fold the corner of each side to make the flaps; doing this will hold the battery 
in place on the left flap. Re-insert the point into the flap. 

• Image No.3 - Turn the paper over and do the same to the other side. 

Step 13 




• Image No.1 - Now that you have finished re-folding your pumpkin it's time to inflate it. 

• Image No.2 - Look for the hole in your fold. 

• Image No.3 - Gently blow through the hole in the top. 



) Make Projects 



www.makeprojects.com 



Page 8 of 9 



Glowing Paper Pumpkins 



Step 14 




• Congratulations! 

• You should now have your finished pumpkin, ready for Halloween! 

• We'd love to see your paper pumpkins; we're sure you could make even better versions! 
Send photos of your projects to info@bareconductive.com and we'll feature them on our 
community page. 



st generated on 2012-10-30 10:06:08 PM. 



) Make Projects 



www.makeprojects.com 



Page 9 of 9